BASF increases production capacity of Neopor

19 June 2018

BASF is increasing its global production capacity for Neopor (expandable polystyrene containing graphite) by a total of 40,000t/yr.

Adjustments in the plants at the two production sites in Ludwigshafen, Germany and Ulsan, Korea, will take place through the fourth quarter of 2018.

At the Ulsan site in Korea, BASF will switch the plant’s entire 85,000t capacity from the classic white EPS (expandable polystyrene) Styropor to the improved insulation raw material Neopor (grey EPS) until end of 2018.

This will allow the company to meet the growing demand for the grey material in the Asian market.

After a series of debottlenecking measures, the Ludwigshafen plant is now capable of producing 200,000t/yr of Neopor.

The annual production capacity for Styropor and Neopor at this location has been increased from 440,000 to a total of 460,000t.

The trend towards grey

The raw material is processed into insulation boards, which contribute to substantial savings of heating energy in new construction and renovations.

Thus, the demand has risen steadily worldwide.

Since introducing the product in 1998, BASF has continuously adapted Neopor’s production capacity.

Compared with Styropor, the graphite containing insulation boards offer better insulation performance.

Due to the lower density, lighter boards can be produced, making construction more efficient and saving material at the same time.

"With this step, we are offering even more customers a product that has been further developed in economic as well as environmental terms to meet the challenges we face with regard to climate protection and resource conservation.

"Worldwide, around 45% of total oil consumption and CO2 emissions – 40% in Germany – is caused by the heating and cooling of buildings.

"This can be significantly reduced by comprehensive, efficient insulation, supplemented by optimised building equipment and the appropriate use of alternative energy sources,” said Klaus Ries, Head of Global Business Management Styrenic Foams at BASF.

Inventor of white and grey EPS

BASF invented and patented Styropor, the well-known, white foam granulate, in 1951, and launched Neopor 20 years ago as the first graphite containing EPS.

The grey, plastic granulate Neopor is an advanced version of the classic white insulation material Styropor.

By adding graphite, which gives the material its grey color, the insulation performance of the boards is increased by up to 20%.

The use of raw material drops by up to 40% compared with the white material.

This enables the processor to produce insulation boards with a lower mass but better insulation performance.

The finished insulation products made of Neopor can be used in a range of applications, particularly for insulating exterior and interior walls and flat roofs.

< Previous article

Ross Straughan joins Blagden

Next article >

AkzoNobel to achieve number one position in Romania with acquisition of Fabryo